Radial Blowers with casing made from cast aluminium

The housings of the ND, RD, HRD, FD/RDF and SVD series are made of solid, vibration resistant cast aluminium.

Volumetric flow rate: 3,2 up to 142 m³/min (192 up to 8.520 m³/h)

Total pressure difference: 330 up to 20.000 Pa

Conveying of small up to medium air volumes

Many devices available with frequency converter

Centrifugal Fans with casing made from steel

The housings of the CFL, CFM, CFH, CFXH and CFMT series are made of steel, resulting in weight reduction and enhanced flexibility.

Volumetric flow rate: 1.000 up to 115.000 m³/h (17 up to 1.920 m³/min)

Total pressure difference: 100 up to 13.900 Pa

Diameter of impellers: 250 up to 1.250 mm

Conveying of high up to very high air volumes

Axial Fans with casing made from steel

The housings of all our axial blower series are made of steel.

Volumetric flow rate: 1.000 up to 168.500 m³/h (17 up to 2.810 m³/min)

Total pressure difference: 100 up to 5.200 Pa

Diameter of impellers: 315 up to 1.600 mm

Side Channel Blowers with casing made of cast aluminium

Whether it be the generation of pressure or vaccum, with side channel blowers from Elektror you're making the right decision!

Volumetric flow rate: 0,15 up to 17,5 m³/min (9 up to 1.050 m³/h)

Total pressure difference pressure: 68 up to 590 mbar

Total pressure difference vacuum: 66 up to 390 mbar

Many devices available with frequency converters

Explosion Protected Blowers

A large number of the units from the ND, RD and HRD series are also available in explosion-protected versions (ATEX).

Volumetric flow rate: 3,2 up to 97 m³/min (192 up to 5.820 m³/h)

Total pressure difference: 330 up to 16.000 Pa